Case studies
Projects, stated as problem and configuration
No customer names without written permission. Every case below describes the application, the constraint and what was installed.
We publish cases as engineering notes rather than testimonials: what the part was, what the constraint was, which machine and line were chosen, and what changed in production. Where a case is still in commissioning, it says so. Where the customer has not authorised their name, it is described by market and application only.
Seat foam, Middle East
Water-heated carousel replacing manual stations; density drift was the trigger.
Read the application →
Decorative panels, GCC
High-pressure machine for filled rigid systems, filtration added after pressure drift.
Read the application →
Furniture foam, Africa
Low-pressure machine with 25% filler in polyol; material cost was the constraint.
Read the application →How a case is written
Each case follows the same four lines: application (what is being produced), constraint (what was failing or what the budget allowed), configuration (machine, line, options), outcome (what changed, measured where the customer allows it). No customer logo is used without written permission. If you are a customer and want your project removed, email sales@bujavi.com and it comes down.
Want a case close to your product?
Tell us the application and we will send the closest documented project, including what did not work the first time.